HCM(ZXG)
WIKA 233.50.063
Delivery time:4-6 weeks
model
232.50/233.50 Not filled/filled
Manufacturing structure
EN 837-1
Table circle diameter
63100 and 160mm
Accuracy level
Table circle diameter 63mm: 1.6
Table circle diameter 100160mm: 1.0
Pressure range
Table circle diameter 63mm: 0... 1 to 0... 1000bar
Table circle diameter 100mm: 0... 0.6 to 0... 1000bar
Table circle diameter 160mm: 0... 0.6 to 0... 1600bar
Can provide other equivalent pressure ranges and vacuum scales
Pressure connection interface size
Material: CrNi stainless steel 316L, external thread radial or axial (eccentric)
Table circle diameter 63mm: G1/4B (male), SW14mm
Table circle diameter 100160mm: G1/2B (male), SW22mm
Measurement system sensitive components
Material: CrNi stainless steel
<100bar: C-type spring tube
≥ 100bar: spiral spring tube
Transmission movement
CrNi stainless steel
Shell
CrNi stainless steel, with a pressure relief hole on the top of the shell (with a diameter of 63mm) and a pressure relief hole on the back of the shell (with a diameter of 100 and 160mm). When the pressure range is ≤ 16bar, the pressure inside the gauge can be balanced through a pressure relief valve
Filling liquid (model 233.50)
Glycerin 99.7%
Permissible operating temperature
Environmental temperature: -40... 60 ℃ (when the case is not filled with liquid)
-20... 60 ℃ (when the case is filled with glycerol)
Medium temperature: max.200 ℃ (when the case is not filled with liquid)
Max.100 ℃ (case filled with liquid)
Optimized/Special
Other process connections; Direct installation of chemical seals; Monel measurement system (model 26X.50, not suitable for back axial interface with a surface diameter of 160); CrNi stainless steel front or rear edge; CrNi stainless steel front edge, polished; Triple edged front edge, CrNi stainless steel polished, with fixed bracket; Environmental temperature -40 ℃: filled with silicone oil; Pressure instrument with electrical signal output